To Contact us call (07) 3379 5922
   

Welcome to Richlands Party Hire Web Site!  All Your Wedding , Corporate Function, Event and Party Requirements In One Stop!

BALLOON ARCH INSTRUCTIONS  

STEP 1:     Measure Dacron line to desired length plus six feet  so that you will have enough extra to tie the ends down.

STEP 2:    Stretch archline full length and tie each end down to anchors (make sure the anchors are sturdy enough and heavy enough to hold down the completed arch).  Make sure there is 3 feet extra line on each end to be used to tie off archline when finished.

STEP 3:

   

Inflate two 11" latex balloons with helium.  Preferably you use a sizer to ensure that all balloons are uniform.  Tie the two balloon necks together to make a set.

STEP 4:      Repeat Step 3 to make two separate sets.

 STEP 5:

 Twist the two sets together making a cluster of four.

 STEP 6:

 Start at one each of the archline and twist one balloon of the cluster around the archline.

 STEP 7:      You will repeat Steps 3 through 6 until you have filled the entire line. 

 STEP 8:      Once you complete the entire line, untie the ends of archlilne from the anchors.  Attach to your decorating anchors (bricks, gallon sized bottles of water, etc).  Once tied down, move the ends until the arch is the height that you prefer.

 ***TO MAKE A TWO COLOR SPIRAL ARCHES

Make sure that balloons 1 & 2 are the same color and balloons 3 & 4 are the same color.  When you reach Step 6 on the 2nd cluster, shift the color over one slot.  Continue shifting each cluster so that the color appear to spiral around the arch.

Send mail to info@richlandspartyhire.com.au with questions or comments about this web site.

Last modified: March 11, 2010